Products

Newly developed FPGA with advanced full digital process ASIC

The HDK-79GX incorporates a newly developed FPGA together with advanced full digital process ASIC to achieve outstanding picture performance.

2/3-inch 2.3 Mega pixel AIT CCDs

2/3-inch 2.3 Mega pixel AIT CCDs are employed to achieve 1000 TVL horizontal resolution with excellent signal to noise ratio of 61dB at F10 (1080/59.94i) or F11 (1080/50i) sensitivity.

2 Channels QTV

Two channels of QTV output (VBS) are available for prompter and external monitoring purposes. The AUX OUT (VBS) connector can be assigned to QTV-1, QTV-2, or Main video by menu. Note:BS/CCU should support 2 channels of QTV.

Camera Operator Assist Functions

There are two types of camera operator assist functions incorporated in the HDK-79GX camera head. The viewfinder detail(VF DTL) function allows the camera operator to increase the detail edges to the viewfinder video for easy-focusing. In addition, the Quick EZ Focus (Focus Assist) function is newly incorporated useful tool, providing very distinct enhancement to the viewfinder edge signal to enable the camera operator to make critical focus adjustment.

Triple Layer Filter (ND/EFF/ECC)

The triple layer filter system can be remotely controlled from OCP/MCP. The three layers are ND (100%, 25%, 6.2%, 1.6%), EFF (Clear, Cross, Snow, Foggy), and Electronic Color Compensation (ECC: 3200K, 4300K, 5600K, 6300K, 8000K). In addition, there is the Variable Color Temp. function that enables the camera operator to variably control the color temperature from 2,000K to 20,000K for more precise adjustment at ease.

Digital Extender

The HDK-79GX features the Digital Extender function that instantly goes up to 4x to enlarge the image at the center of shot without any loss in image sensitivity. * It will reduce the resolution of the image.

Moire Reduction Filter (Factory Option)

An Anti-Moire Optical Low-Pass Filter can be fitted in the filter wheel to reduce unwanted moire video patterns when shooting a large LED screen, etc.

Lens Aberration Correction function

The Lens Aberration Correction function is newly incorporated for minimizing the blur and colored edges caused mainly by lens chromatic aberration.

Docking style camera body

With a docking style camera body, either an FA (Fiber Adaptor) or TA (Triax Adaptor) can be mounted depending on the use.

Advanced features made possible with digital technology

Master Gain Control, Variable Color Temp., Custom Gamma functions are newly incorporated by using advanced digital technology, providing favorable images with flexible adjustments.

Video processing technology to maximize the benefit of 16-bits

This camera is designed from the start based on 16-bit A/D and matching 16-bit DSP to maximize the benefits of high bit quantization. Especially for the dark areas of the picture, the higher gradation for gamma and other circuits improves the reproduction, providing for more natural color in the shadow areas of the picture.

SE-H700 System Expander

The SE-H700 System Expander enables the use of the 9-inch viewfinder and full studio lenses with the HDK-79GX, converting the portable camera into a full facility studio camera. Installation of the camera into the SE-H700 is easy, and conversion back to portable configuration is quick for maximum operating flexibility.

Sophisticated Camera Control Panel System

There are two types of camera control panel systems, each with a wide range of camera control capability. The conventional OCP allows direct and quick control of various camera parameters using dedicated buttons on the panel. The OCP-200 / MCP-200 Network based control panel system allows any OCP to control any camera with assignment set at the OCP itself. System wiring is simplified with control of up to 96 cameras via a single coax cable between CCU locations and video control locations. The OCP-200 and MCP-200 include touch screen LCDs. The depth-of-control of the OCP-200 can be selected from basic to complete to fit the customers' operating discipline. Conventional one by one camera control connection is also available with the OCP-200.

3G Camera Control Unit
CCU-970

Base Station   
BS-97

Ethernet Capable Operation Control Panel 
OCP-300

7.4-inch OLED Viewfinder
VFE740HD

Control Panel Hub / Base Station Hub
CPH-200E / BSH-200E

3G Camera Control Unit
CCU-980

Fiber Adaptor
FA-300 (Lemo version)

Operation Control Panel
OCP-100

9-inch Multi-Format Color LCD-Viewfinder
VFL912HD

19-Inch Full-rack Camera Control Unit
CCU-970M

Base Station
BSF-300 (Lemo version)

Master Control Panel / Operation Control Panel
MCP-200 / OCP-200

2-inch color LCD viewfinder
VFL201A

3G Base Station
BS-89

• Personal information is required
• Software

To download these information, personal information is required.
Click the upper right button to download.