24-inch Medical Grade Full HD LCD-Monitor

MLW-2425C

24-inch Medical Grade Full HD LCD-Monitor

MLW-2425C is a wide screen 24-inch LCD monitor with the high resolution 1920(H) x 1080(V) Full HD LCD panel, 1.06 Billion colour graduation (10-bit x 3-Colour), maximum intensity of 400cd/m2 and wide angle of 178 degrees. The Jaggy-less IP conversion and Ikegami unique circuit enable to display more natural images. High performance with HD quality is provided for medical specialists and experts. HD signal input with RGB/Component and optional Multi-SDI input are available.

10-bit signal input

10-bit signal input is built-in MLW-2425C.

10-bit signal process engine

10-bit signal processing based on Ikegami image processing technology allows the smooth gradation of colour.

10-bit LCD panel

Further smooth colour gradation can be achieved by processing 10 bit signal from signal input to display.

Jaggy-less I/P conversion process

Ikegami unique Jaggy-less I/P conversion process enables the smooth and clear lines on the display.

Wide colour gamut

Wide colour gamut (102% of NTSC) can be represented with wider gamut than EBU/AMPTE standard. Colour gamut setting is selectable for user’s favorite.

178 degrees high contrast viewing angle

LCD panel based on IPS technology is employed for 178 degrees high contrast viewing on UP/DOWN/LEFT/RIGHT. This characteristic prevents from intensity and colour shift by the viewing angle.

Applicable Various Input Signal

Applicable to HD signal (RGB, Component), NTSC/PAL signal (Composite, Y/C) and PC signal input (Analog RGB, Digital DVI-D). SD/HD-SDI signal input is available too.

Multi-Display function with Side-by-Side and Picture-in-Picture

Two types of input images can be displayed simultaneously with and Side-by-Side and Picture-in-Picture display mode.

Flip function

Images can be flipped horizontally and vertically, allowing the correction of image inversion caused by the optics.

Various Gamma Characteristics

Variety of Gamma setting can be set, including the Standard CRT Gamma of 2.2 and the DICOM Gamma.

Hue and Chroma setting for all kind of input signal

Colour can be adjusted flexibly for user’s favorite by Hue and Chroma.

Anti-Refection hard coat Screen

Anti-Reflection hard coat screen is installed as standard to reduce the effect of the reflection and to protect the LCD panel.

IR remote controller

A remote controller can be attached as an option to help with setting up of the monitor when the it is installed at a high position.

Display power management function

The chosen signal is not input for more than 30 seconds, the monitor automatically can turn OFF to save the power. The function can set ON/OFF.

User memory

Maximum four (4) settings can be set as preset. The parameter such as colour temperature, hue, chroma, gamma, R/G/B gain and display mode can be saved for each user or application.

Maximum 30 meters length of DVI-D cable available

Signal compensation function is installed and the signal degradation is prevented. Then, maximum 30 meters length of DVI-D cable can be used with the monitor.

VESA mount available

A variety of installation brackets for arms and walls can be chosen with the combination of VESA mount.

LCD Panel
Panel Size	24-inch
Pixels	1920 x 1200
Display Size	518 x 324mm
Aspect Ratio	16:10
Colour Gradient	10-bit x 3 (1.06B)
Colour gamut	Wide colour gamut
View Angle	178°/ 178°(Typical)

Input Signal
SDTV	Analog : VBS x 1ch Y/C x 1ch RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) 3 Digital : Multi-SDI x 1ch (2ch is available with adding option module) 3
HDTV	Analog : RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) 3 Digital : Multi-SDI x 1ch (2ch is available with adding option module) 3
PC	DVI :DVI-D x 1ch (2ch is available with adding option module) 3 RGB Analog : HD15P D-Sub x 1ch (2ch is available with adding option module) 3 Supported Resolution : VGA to WUXGA

General
Multi Display	Picture in Picture or Side by Side Swap display is available
Invert Top and Bottom or Right and Left Function	Standard
Remote Terminal	Parallel/Serial
Resolutions (TVL)	1000 TV Line or more (at component input)
Maximum Brightness	400cd/m2
Contrast Ratio	1000:1 (Typical)
Safety Approval	UL60601-1, CSA C22.2No.601.1
EMC Approval	FCC Class A, VCCI Class A
Power Requirement	AC100V to AC120V, AC200V to AC240V
Power Consumption	130W Max
Operation	Temperature : 5 to 35°C Humidity : 30 to 80% (non condensing)
Storage	Temperature : -20 to 60°C Humidity : 30 to 90% (non condensing)
Dimensions	W583 x H422 x D109mm (excluding stand and protrusions)
Weight	7.4kg or less (excluding stand)
Accessories	AC Power Cable, Manual