2M / E Digital Video Switcher

HSS-200

2M / E Digital Video Switcher

Discontinued Product

The HSS-200 is a compact 16×6 I/O, 2M/E switcher which is optimized for live video production such as Flight Rack application or small mobile van installation. Optional Tally Ports, Intercom Module, and Sync Generator support easy system integration.

System Diagram (including options)

Image Effects

400 preset/customized Wipe Patterns are available. Linear Key, Luminance Key, Chroma Key, PatternKey or Full Key can be selectable.

Programmable Effects

1) 7 modes of Programmable Effects are available as below:
2) Assign Mode Preset Wipe Pattern can be customized and stored.
3) Effect Memory Up to 100 patterns of M/E assignment, Transition pattern and Key Setup can be stored.
4) User DFE Up to 100 patterns of customized Wipe patterns can be stored
5) KEY Memory 4 patterns of Key Setup can be stored.
6) Source Memory Key setup for input sources and Color Corrector Setup can be stored.
7) Button Memorry 100 patterns of operating order can be stored.
8) Key Frame Key Frame Memory for 2ch DVE (50 Frames x 14 Register)

Operation Console

Supports PGM/PST transition 14 Cross Point Buttons 8.4-inch LCD Touch Panel USB port for Setup Data Storage 19-inch Rack Mountable Width and 4RU Height.

Main Frame

Low Power Consumption, 150W or less 19-inch Rack Mountable Width and 3RU Height Optional Tally, Intercom, GPI, Sync Generator and Editor I/F available.

System Examples (with Options)

Video Input	16 Inputs / HD-SDI (SMPTE292M) or SD-SDI (SMPTE259M)
Video Output	6 Outputs / HD-SDI (SMPTE292M) or SD-SDI (SMPTE259M)
External Sync Input	Tri-level Sync, ±0.3V High Impedance or Black Burst, 0.286Vp-p High Impedance
Video Delay	1.0H Typical, ±0.3H adjustable
AVDL Timing	-1.3H ~ +0.7H against Reference Signal
Output Phase control Range	+0.3H ~ +1.3H against Reference Signal
Control System Delay	3VD (50ms) or less
Ambient Temperature	0 ~ 40 °C : Full Performance Assured 0 ~ 45 °C : Operation Assured
Control Cable	ETHERNET: 100Base-TX/RJ-45 Cable, Up to 100m ARCNET: @BNC 75 ohm Cable, Up to 200m
Power Requirement	117VAC (85V ~ 132V) / 220VAC (170V ~ 264V), 50/60Hz
Recovery after Power Down	Within 24 hours: Automatic recovery as it was. Over 24 hours: Back to initial user setup.
Dimensions	Operation Console : W483 x H155 x D420 mm / 4RU Mainframe: W483 x H132 x D500 mm / 3RU
Power Consumption	Operation Console: 50VA or less Mainframe 150VA or less
Weight Operation Console	11kg
Mainframe	15kg