PP-57D
Compact Digital Microwave Transmitter
Discontinued Product
The 57D is a compact and light-weight one-piece microwave transmitter. The design construction permits a variety of applications including mobile or limited space locations. It can input a HD-SDI or SD-SDI signal with a built-in codec. Despite of the compactness, it outputs 200mW power (7GHz Band) and enables a practical distance transmission.
A MPEG-2 or JPEG2000 or H.264 Encoder is available as built-in codec.
2 transmitter models is available.
Input signal available with HD-SDI / DVB-ASI (TS).
Mounting the PP-57D on ENG camera realizes a wireless camera system.
About 3,000m transmission in OFDM, at 24Mbps bit rate.
Built-in Codec available with MPEG-2 or JPEG2000 or H.264
MPEG-2 or H.264 HD/SD Encoder : HD-SDI (SMPTE292M) / SD-SDI (SMPTE259M)
JPEG2000 Encoder : HD-SDI (SMPTE292M)
Two models available for a choice by application
The PP-57D is an OFDM modulation model. The OFDM modulation maintains robust transmission even in multi-path conditions. The PP-57D is switchable between the single carrier QAM and OFDM.
Input signal available with HD-SDI / DVB-ASI (TS).
Input signal available with HD-SDI / DVB-ASI (TS). Rate converter available in the DVB-ASI (TS) input mode.
Mounting the PP-57/57D on ENG camera for wireless system
Mounting the PP-57/57D on ENG camera for wireless system Hardware is available to mount a PP-57/57D on an Ikegami HDTV camera to realize a wireless HD camera system.
3,000m transmission in OFDM at 24Mbps bit rate
The PP-57D system transmits about 3,000m in OFDM, at 24Mbps bit rate, with an omni-directional TX antenna and 0.3φm parabolic RX antenna.
| Transmitter | |
| Frequency | Band: 3.5GHz / 5.8GHz / 7GHz / 10GHz / 12GHz Preset Channel: 1ch *Channel cassette type |
| Modulation Method | QAM : 64QAM / 32QAM / 16QAM / QPSK(Option) OFDM : 64QAM / 32QAM / 16QAM / D-QPSK / D-BPSK / BPSK(Option) |
| Output Power |
QAM : 0.3W OFDM : 0.2W Note: Max output power is 0.1W for 10GHz / 12GHz Band model |
| Input Signals |
HD/SD-SDI : BNC x1 (used when the built-in MPEG-2 HD/SD Encoder or the JPEG2000 or H.264 HD/SD Encoder is installed. |
| Power | Requirement : DC+12V(+10.8V ～ +16.8V) Consumption: Less than 60W (at DC+12V) |
| Weight | Less than 2.5kg |
| Dimensions (excl. outshoot) | W140 x H70 x D210mm |
- Personal information is required
- Software
To download these information, personal information is required.
Click the upper right button to download.