Print

Security


Security Camera

ICD-48[EIA] / 48E[CCIR]Stop
1/2" CCD Multi-Function DSP Monochrome Camera
1/2 ZOOM

The ICD-48/ICD-48E is a 1/2"CCD Digital Signal Processing (DSP) Monochrome Camera,with High Sensitivity (0.0075 lux at F1.2) and High Resolution (Horizontal Resolution 560TV lines[CCIR]/570 TV lines[EIA]).
It is extremely Infra-Red sensitive giving the best performance in its class
when used in conjunction with Infra-Red lighting (800nm to 1000nm approx).
It has a remote set-up capability via RS-485 to allow set-up alterations even after installation.

[Discontnued：April. 2012]


Features Ratings
High Sensitivity High Resolution and High Quality Picture Performance
Low Smear Level Remote Set-up Capability
Manual/Variable Electronic Shutter BLC (Back Light Compensation) function
Other Standard Functions   
High Sensitivity

With its high sensitivity of 0.0075 lux at F1.2 the ICD-48E/48 has a near black Infra-red sensitivity (800nm to 1000nm approx), which is about five times higher than it’s predecessors, the award winning ICD-42E and ICD-47E. This makes it ideal for outdoor surveillance when round the clock performance is required.
High Resolution and High Quality Picture Performance

The camera delivers a high horizontal resolution of more than 560 TV lines
(CCIR)/570 TV lines (EIA) and realises a high quality picture with a Signal
to Noise ratio more than 50dB.
Low Smear Level

A near natural image is delivered, due to the low smear performance of
-120dB, even in difficult high bright situations like those of direct car
headlights.
Remote Set-up Capability

The set-up of the camera cannot only be achieved via the OSD but also remotely by RS-
485 connection. It is possible to change the setup from a PC through the RS-485 connection
after installation, even if, the camera is installed, at height or at a long distance from the control centre.
Manual/Variable Electronic Shutter

The ICD-48E/ICD-48 has 9 steps of manual electronic shutter from 1/50 (EIA 1/60) to 1/100,000 seconds. It also has, a variable shutter function which can change its shutter speed within its range from 1/50 (EIA: 1/60) to 1/100,000.
BLC (Back Light Compensation) function

An intelligent BLC function gives appropriate brightness, even if there is a high bright back light illumination of subjects in the viewed scene.
Other Standard Functions

AES (Automatic Electronic Shutter), Two-Way Auto Iris control (VIDEO Iris and DC Iris), Line Lock/Internal Lock and AGC (Automatic Gain Control).
  


Features Ratings
Ratings / Performance
Ratings / Performance
Imaging Device 1/2 inch, Interline Transfer CCD
Effective Pixels CCIR: 752(H) x 582(V), 440,000 pixels approx.
EIA: 768(H) x 494(V), 380,000 pixels approx.
Scanning System CCIR: 625 lines at 50Hz, 2:1 interlace
EIA: 525 lines at 59.94Hz, 2:1 interlace
Synchronization System INTERNAL/LINELOCK/GENLOCK
Video Output VS 1.0 Vp-p/75 ohms
Horizontal Resolution CCIR: 560 TV lines
EIA: 570 TV lines
S/N Ratio more than 50 dB(AGC OFF, DETAIL OFF, weight ON)
Minimum Illumination 0.0075lux at F1.2
0.01lux at F1.4(Light source: Halogen lamp, Colour temperature: 2856K)
BLC (Backlight Compensation) ON/OFF switchable and level adjustable
AES Function ON/OFF switchable
AES range: CCIR: 1:2000, EIA: 1: 1600
High-speed Electronic Shutter CCIR OFF (1/50), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/100000
Variable Shutter 1/50 to 1/100000
EIA OFF (1/60), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/100000
Variable Shutter 1/60 to 1/100000
AGC (Automatic Gain Control) ON (AGC/HYPER-AGC)/OFF (LOW/MID/HIGH) switchable
Auto Iris Function Video Iris/DC Iris selectable (DC iris level is adjustable)
Lens Mount CS mount (C mount adaptor can be used)
Camera ID function Built in (1 line, 16 characters)
Local Setup function OSD set-up and selection is available by 5 buttons
Camera ID set-up
AES/Electronic Shutter selection
BLC ON/OFF/SPOT selection and level adjustment
DC Iris level adjustment
AGC/Hyper-AGC selection and GAIN LOW/MID/HIGH (AGC OFF) selection
INTERNAL LOCK/LINELOCK selection and phase adjustment
GENLOCK phase adjustment
DETAIL level adjustment
PEDESTAL level adjustment
MENU LOCK
RS-485 Communication Built in
Local Set up item and Equipment ID for RS-485
Flange Back Adjustment Mechanism Built in
Power Requirement CCIR AC24V±10% 50Hz /DC12V (10.5V to 15V)
AC230V±15% 50Hz
EIA AC24V±10% 60Hz /DC12V (10.5V to 15V)
Power Consumption CCIR AC230V 30mA approx.
AC24V 310mA approx.
DC12V 320mA approx.
EIA AC24V/DC12V 4.3W approx.
Operating Ambient Temperature -10°C to +50°C(14°F to 122°F)
Camera Mount 1/4"-20UNC
Dimensions W62 x H55 x D118mm(W2.44 x H2.17 x D4.65inch)
Weight AC24V/DC12V type 430g approx.(0.95 lbs)
AC230V type 860g approx.(1.83 lbs)
Input/Output Connectors VIDEO OUT BNC
GENLOCK IN BNC
LENS 4P (applicable connector E4-191J-150 or equivalent)
RS-485 5P (push in terminal)
AC24V/DC12V Input 2P (push in terminal)
Accessories Operation Manual
C Mount Adaptor
Auto Iris Connector (E4-191J-150 or equivalent, CCIR only)
PAGE TOP