10-bit signal input

10-bit signal input is available.

	10-bit signal process engine

10-bit signal processing based on Ikegami image processing technology allows the smooth gradation of colour.

	10-bit LCD panel

Further smooth colour gradation can be achieved by processing 10 bit signal from signal input to display.

	Jaggy-less I/P conversion process

Ikegami unique Jaggy-less I/P conversion process enables the smooth and clear lines on the display.

	Wide colour gamut

Wide colour gamut (102% of NTSC) can be represented with wider gamut than EBU/AMPTE standard.
Colour gamut setting is selectable for user’s favorite.

	178 degrees high contrast viewing angle

LCD panel based on IPS technology is employed for 178 degrees high contrast viewing on UP/DOWN/LEFT/RIGHT. This characteristic prevents from intensity and colour shift by the viewing angle.

	APPLICABLE VARIOUS INPUT SIGNAL

Applicable to HD signal (RGB, Component), NTSC/PAL signal (Composite, Y/C) and PC signal input (Analog RGB, Digital DVI-D).
SD/HD-SDI signal input is available too.

	Multi-Display function with Side-by-Side and Picture-in-Picture

Two types of input images can be displayed simultaneously with and Side-by-Side and Picture-in-Picture display mode.

	Flip function

Images can be flipped horizontally and vertically, allowing the correction of image inversion caused by the optics.

	Various Gamma Characteristics

Variety of Gamma setting can be set, including the Standard CRT Gamma of 2.2 and the DICOM Gamma.

	Hue and Chroma setting for all kind of input signal

Colour can be adjusted flexibly for user’s favorite by Hue and Chroma.

	Anti-Refection hard coat Screen

Anti-Reflection hard coat screen is installed as standard to reduce the effect of the reflection and to protect the LCD panel.

	IR remote controller

A remote controller can be attached as an option to help with setting up of the monitor when the it is installed at a high position.

	Display power management function

The chosen signal is not input for more than 30 seconds, the monitor automatically can turn OFF to save the power. The function can set ON/OFF.

	User memory

Maximum four (4) settings can be set as preset. The parameter such as colour temperature, hue, chroma, gamma, R/G/B gain and display mode can be saved for each user or application.

	Maximum 30 meters length of DVI-D cable available

Signal compensation function is installed and the signal degradation is prevented. Then, maximum 30 meters length of DVI-D cable can be used with the monitor.

	VESA mount available

A variety of installation brackets for arms and walls can be chosen with the combination of VESA mount.