MLW-3225C 32-inch Medical Grade Full HD LCD Monitor | Products · Medical

Medical Grade Monitor

MLW-3225C

32-inch Medical Grade Full HD LCD Monitor

MLW-3225C is a wide screen 32-inch LCD monitor with the high resolution 1920(H) x 1080(V) Full HD LCD panel, 1 billion color (10bit~3COLOR), maximum intensity of 500cd/m2 and wide angle of 178 degrees. The Jaggy-less IP conversion and Ikegami unique circuit enable to display more natural images. High performance with HD quality is provided for medical specialists and experts. HD signal input with RGB/Component and optional Multi-SDI input are available.

10-bit signal input		10-bit signal process engine

10-bit LCD panel		Jaggy-less I/P conversion process

178 degrees high contrast viewing angle		APPLICABLE VARIOUS INPUT SIGNAL

Multi-Display function with Side-by-Side and Picture-in-Picture		Various Gamma Characteristics

Hue and Chroma setting for all kind of input signal		Anti-Refection hard coat Screen

IR remote controller		Display power management function

User memory		Maximum 30 meters length of DVI-D cable available

VESA mount available


	10-bit signal input

10-bit signal input is available.


	10-bit signal process engine

10-bit signal processing based on Ikegami image processing technology allows the smooth gradation of colour.


	10-bit LCD panel

Further smooth colour gradation can be achieved by processing 10 bit signal from signal input to display.


	Jaggy-less I/P conversion process

Ikegami unique Jaggy-less I/P conversion process enables the smooth and clear lines on the display.


	178 degrees high contrast viewing angle

LCD panel based on IPS technology is employed for 178 degrees high contrast viewing on UP/DOWN/LEFT/RIGHT. This characteristic prevents from intensity and colour shift by the viewing angle.


	APPLICABLE VARIOUS INPUT SIGNAL

Applicable to HD signal (RGB, Component), NTSC/PAL signal (Composite, Y/C) and PC signal input (Analog RGB, Digital DVI-D).
SD/HD-SDI signal input is available too.


	Multi-Display function with Side-by-Side and Picture-in-Picture

Two types of input images can be displayed simultaneously with and Side-by-Side and Picture-in-Picture display mode.


	Various Gamma Characteristics

Variety of Gamma setting can be set, including the Standard CRT Gamma of 2.2 and the DICOM Gamma.


	Hue and Chroma setting for all kind of input signal

Colour can be adjusted flexibly for user’s favorite by Hue and Chroma.


	Anti-Refection hard coat Screen

Anti-Reflection hard coat screen is installed as standard to reduce the effect of the reflection and to protect the LCD panel.


	IR remote controller

A remote controller can be attached as an option to help with setting up of the monitor when the it is installed at a high position.


	Display power management function

The chosen signal is not input for more than 30 seconds, the monitor automatically can turn OFF to save the power. The function can set ON/OFF.


	User memory

Maximum four (4) settings can be set as preset. The parameter such as colour temperature, hue, chroma, gamma, R/G/B gain and display mode can be saved for each user or application.


	Maximum 30 meters length of DVI-D cable available

Signal compensation function is installed and the signal degradation is prevented. Then, maximum 30 meters length of DVI-D cable can be used with the monitor.


	VESA mount available

A variety of installation brackets for arms and walls can be chosen with the combination of VESA mount.

Ratings / Performance


	Ratings / Performance

LCD Panel
Panel Size		32-inch
Pixels		1920 x 1080
Display Size		698 x 393mm
Aspect Ratio		16:9
Colour Gradient		8-bit x 3 (16.7M)
Colour gamut		Wide colour gamut
View Angle		178°/ 178°(Typical)

Input Signal
SDTV	Analog	VBS x 1ch
		Y/C x 1ch
		RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) *3
	Digital	Multi-SDI x 1ch
		(2ch is available with adding option module) *3
HDTV	Analog	RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) *3
	Digital	Multi-SDI x 1ch (2ch is available with adding option module) *3
PC	DVI	DVI-D x 1ch (2ch is available with adding option module) *3
	RGB Analog	HD15P D-Sub x 1ch (2ch is available with adding option module) *3

General
Multi Display	Remote Terminal	Remote Terminal
Remote Terminal		Parallel/Serial
Resolutions (TVL)		1000 TV Line or more (at component input)
Maximum Brightness		500cd/m2
Contrast Ration		1300:1 (Typical)
Safety Approval		UL60601-1, CSA22.2No.601, EN60601-1
EMC Approval		FCC Class A, EN60601-1-2, VCCI Class A
Power Requirement		AC100V to AC120V, AC200V to AC240V
Power Consumption		160W Max.
Operation	Temperature	5 to 35°C
	Humidity	30 to 80% (non condensing)
Storage	Temperature	-20 to 60°C
	Humidity	30 to 90% (non condensing)
Dimensions (excluding stand and protrusions)		W780 x H493 x D117.5mm
Weight (excluding stand) and protrusions)		13.0kg or less
Accessoriesstand)		AC Power Cable, Manual